Flow Control: Liters Counter, 1/2-inch (DN15) flow sensor, Valve, Power supply and data cable

Package that includes 1-alarm liter meter + flow sensor + valve for 1/2" inch (DN15) pipe + 12V/3A power supply + USB-Serial cable for monitoring + Coupon to download JDH FlowVisor for free.

**Does not include extra wiring, connectors, buttons, or other accessories, only what appears in the images -- THANK YOU!**

A flowmeter is an instrument used to measure the flow or volumetric flow rate of a fluid.
Its mechanical parts consist of a mill with transverse blades to the flow circulation, which has a permanent magnet at one end.
When this magnet rotates, it generates a variable magnetic field that is read by a magnetic field effect sensor (Hall effect sensor), then the electronic circuit converts it into pulses that it transmits through a wire.
In this type of flowmeter, magnets are installed at the ends of the blades. As the magnets rotate they pass near a red switch that counts the pulses.

*Includes 12V electrovalve for 1/2" (DN15) pipe

Sensor Confuguration: 2222uL/pulse

**Friendly and intuitive touch user interface. The display is in English.

**EASY TO USE
Allows configuration of values adjusting by decade, for greater speed and convenience.

**Compact and convenient design
Dimensions: 7.8cm*4cm*2.5cm
It has screw terminals for connection of the sensor and alarms
Special housing for instrument panel with support clips

**Technical Characteristics and Adjustments

+Supply: 6 to 24VDC at 300mA (minimum)
+Ambient temperature: -10°C to 50°C (do not use outdoors, do not expose to solar radiation)
+Minimum measurement: 0.01 Liters
+Maximum measurement: 9,999,999.99 Liters
+Countdown alarm for minimum volume: 0.1 Liters
+Alarm countdown for maximum volume: 9,999,999.9 Liters
+Liters per pulse minimum: 140ml/pulse
+Liters per maximum pulse: 83400ml/pulse
+Minimum flow measurement of 0.01 L/min
+Maximum flow measurement up to 4960L/min (theoretical with sensor 83400 uL/pulse up to 1000 Hz)

**Alarm dry contacts
+max load
+Resistive: 0.40 A at 125 VAC, 2 A at 30 VDC
+Inductive (power factor= 0.4) (L/R = 7 ms): 0.20 A at 125 VAC, 1 A at 30 VDC
+Maximum charging current: 3A
+Maximum operating voltage: 250 VAC, 220VDC
+Maximum switching capacity:
+Resistive: 50VA, 60W
+Inductive (power factor= 0.4) (L/R = 7 ms): 25VA, 30W