Automatic Liquid Filling Pack 4 Capacities for 1 1/2 inch pipe with Valve DN40

Package that includes liter counter with 4 alarms + selector + flow sensor + valve for 1 1/2 inch pipe (DN40) + 12V/3A power supply + USB-Serial cable for monitoring + Coupon to download JDH FlowVisor for free.

**Does not include extra wiring, connectors, buttons, or other accessories, only what appears in the images -- THANK YOU!**

With this package you can automate the filling of jugs, buckets, containers, barrels, tanks, bottles or any type of liquid container. It has a selector that allows you to fill 4 different capacities.

Incluye electroválvula de 12V normalmente cerrada para tubería de 1 1/4 pulgada (DN32)

The sensor must be placed in line with the pipe carrying the fluid in a vertical position

The important thing is that during installation the pipe is full at all times, with the liquid completely covering the cross-sectional area of the sensor. For this reason, it is preferred that the sensor be installed in a vertical section of pipe, with the flow running from bottom to top. Otherwise, there is a risk that the turbine will rotate even with any trickle of water running, giving incorrect measurements.

SETTINGS for Sensor: 33333uL/pulse

The Totalizer has a digital input to reset alarms, especially for automation applications for filling tanks/containers or dispensing liquids.

Allows you to configure four alarms that activate an audible alert and a dry contact.

Alarms are activated either by Flow or Volume. If it is by volume, a countdown is kept that decreases by the liters supplied.

Values can be displayed in Liters or Gallons (US)

**Friendly and intuitive touch user interface. The display is multilingual, English, Spanish, French, German and Chinese.

**EASY TO USE

Allows configuration of values by adjusting by decade, for greater speed and convenience.

**Compact and convenient design
Dimensions: 14.5cm*9.0cm*4.1cm

It has screw terminals for connection of the sensor and alarms

Special housing for 35mm DIN rail

**Technical Characteristics and Adjustments
+Power: 6 to 9VDC at 300mA (minimum)
+Ambient temperature: -10°C to 50°C (do not use outdoors, do not expose to solar radiation)
+Minimum measurement: 0.01 Liters
+Maximum measurement: 9,999,999.99 Liters
+Minimum volume alarm countdown: 0.1 Liters
+Maximum volume alarm countdown: 9,999,999.9 Liters
+Liters per pulse minimum: 140ml/pulse
+Liters per maximum pulse: 83400ml/pulse
+Minimum flow measurement of 0.01 L/min
+Maximum flow measurement up to 4960L/min (theoretical with sensor 83400 uL/pulse up to 1000 Hz)

**Dry Alarm Contacts

+Maximum load
+Resistive: 0.40 A at 125 VAC, 2 A at 30 VDC
+Inductive (power factor = 0.4) (L/R = 7 ms): 0.20 A at 125 VAC, 1 A at 30 VDC
+Maximum charging current: 3A
+Maximum operating voltage: 250 VAC, 220VDC
+Maximum switching capacity:
+Resistive: 50VA, 60W
+Inductive (power factor = 0.4) (L/R = 7 ms): 25VA, 30W